CamKing 2000
A revolutionary new method for breaking in today's aggressive flat tappet camshafts outside of the motor!
You know the routine... Assemble the heads with lightweight valve springs. Prime the carbs and pre-set the ignition timing. Pray that she fires the first time and get the RPM's up. Keep an eye on the water temperature and listen for any unusual noise.
20 eardrum splitting minutes later you breathe a sigh of relief; everything's okay. The engine sounds great, and you are glad that you took the time to break-in the camshaft the right way. But, now comes the drudgery of installing the racing valve springs. "Yeah, I can do it in an hour," you brag. A few burnt fingers and a couple of gouged knuckles later and the job's still not finished.
"There's got to be a better way," you say to yourself. There is. The CamKing 2000.
CAM Research and the patented CamKing 2000 does the work for you, providing a full 30 minutes of steady 2,000 RPMs to your flat tappet cam. The cam is completely submerged in oil during the process. The spring pressure starts out low and gradually increases to full spring pressure during the break-in period. When completed, the lifters are numbered and shipped to you. All that is left to do is lube them and drop them in. They're ready to fire!
30 minute flat tappet break-in $60.00
CamKing 2000 - The only clear choice
To learn more about the camshaft break-in service, call Cam Research at 303-762-0022 weekdays.